How to with Deck Redo

Background: This deck was built in 2005, allowed to sit for the wood’s mill-glaze to be removed and then stained the homeowners with a solid stain product Behr *. Unfortunately the deck was not properly prepared and the stain chosen was not the recommendation of Deck ReDo.  Within two years of typical deck use, this stain had begun peeling and was in need of restoration.

As you will see the restoration process, even on a simple deck such as this one, can be extensive.  First the deck needs to be power washed, stripped, sanded and then stained/sealed.  The process was more lengthy and difficult because it was not originally done properly.  Unfortunately I do not have an image of this decks peeling, however it looked similar to a deck that we recently restored in Edina which was in similar condition:

After the deck had been stripped with deck stripper and power-washed with three thousand psi washer, there was still much work to be done.  The stripper did not remove all the stain, particularly where the wood fibers are not as soft – such as the knots.

After lengthy sanding with a coarse sander and then again with a sheet sander the stain was in great presentation and ready for the staining, sealing and preservative.  As much as the wood grain is appreciated by homeowners, if it is not promptly sealed the deck will Grey and take harsh punishment from the elements (sun, rain, ice, insects, etc.)

It was the choice of the homeowners to mix a natural cedar tone stain a rustic stain to add a little more tint.  We were happy to give them the exact color and they were glad to see that the wood grains were still quite visible.

As you will notice the stain is not a solid stain but rather a penetrating stain.  This means the stain, sealer, preservative actually soaks into the wood allowing it to gracefully fade over time while still protecting it from the elements.  The below pictures were taken one year after the deck was stained and is a representation of how a deck should react to water if properly stained.

* Behr is a trademarked product by Behr Process Corporation.  Deck ReDo is in no way affiliated with Behr and cannot speak on their behalf.  All content given in regards to Behr is strictly anecdotal and opinion of Deck ReDo LLC.

Peeling stain By forestviewstaining

Peeling of solid stain

Tags: behr, deck stain, deck stain removal, deck striping, deckredo, mn

This entry was posted on Thursday, July 16th, 2009 at 8:21 pm and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.